Charging instructions
Never leave the lightsaber charging unattended. Only use the included charger to charge the lightsaber exclusively (max. 1 amp charging current). Higher charging currents may cause defects. Failure to follow this instruction will void the warranty!
If you will not be using the lightsaber for an extended period, we recommend removing the battery from the hilt to avoid deep discharge. For models with a “killswitch”, it is sufficient to set the switch to “OFF”.
When charging, make sure that the “killswitch” is set to “ON”, otherwise the battery will not charge, even if a “charging” sound is heard. Set the switch back to “OFF” once charging is complete and the lightsaber is not in use.
Slide-Out Core Tutorial
The construction of the lightsabers is continuously revised and improved, which means that your lightsaber may have a different design than the one shown in the video. If you have any questions, we are happy to help.
To access the charging port, usually only the lower part of the lightsaber is unscrewed by hand (as shown in the video). The same procedure can be used for most premium and replica models.
